Backing Up Your System Into A Disc; Creating A Restore Point - BenQ Joybook Lite U105i Series User Manual

4. A confirmation message appears. To proceed with the
operation, click Yes
5. Follow the remaining on-screen instructions to complete the
operation.

Backing up your system into a disc

QDataTrove allows you to back up your system drive (C: drive)
into CD/DVD discs. It makes an exact copy of your entire
system drive (C: drive), including the operating system, installed
software programs, registry settings, etc. To perform the
operation, follow the steps below:
1. In QDataTrove, click the
2. Click the button to select
Backup to Disc .
3. A confirmation message appears. Click
Joybook Lite, and it will enter Windows PE automatically to
make a system backup image.
4. After backup finishes, the system will boot into Windows
Create User Recovery CD/DVD
automatically. A
appears on the screen.
a. Select a disc type from the
menu.
44 Recovering your system using QDataTrove
.
Back up
tab.
System Drive Backup -
Yes
to restart your
Disc Category drop-down
b. Click
• To use this function, your Joybook Lite must come with a CD/
DVD burner. If your model does not come with a CD/DVD
burner, use an external CD/DVD burner instead.
• The disc types (CD/DVD) and ability (reading/recording) of
the optical drive may vary depending on your purchased
model.
• The required number of discs may vary depending on the
size of your system image.
• If you want to back up the system to a USB flash disk, see
"Creating bootable USB flash disk" on page
5. Follow the remaining on-screen instructions to complete the
operation.

Creating a restore point

Restore Points are the earlier states of your Joybook Lite's system
drive created by System Protection featured in Windows System
Restore. By default, restore points are created at specific
intervals and before significant system events, such as before
window
installing a new software.
Should your system become unstable or encounter unexpected
loss of data, you can then try to restore your system drive to its
previous state from a list of restore points.
For more information about System Protection, refer to Start >
Help and Support in Windows XP or Windows 7.
QDataTrove allows you to access
in Windows, and manually create a restore point whenever
needed. To perform the operation, follow the steps below:
1. In QDataTrove, click the
OK
to proceed.
Backup and Restore Center
Back up
tab.
48.