Table of Contents
Advertisement
Configuring Dual Stack Lite Instance
Command or Action
Step 19
external-logging syslog
Example:
RP/0/RP0/CPU0:router(config-cgn-ds-lite)#
external-logging syslog
Step 20
server
Example:
RP/0/RP0/CPU0:router(config-cgn-ds-lite-extlog)# server
RP/0/RP0/CPU0:router(config-cgn-ds-lite-extlog-server)#
Step 21
address A.B.C.D port port-number
Example:
RP/0/RP0/CPU0:router(config-cgn-ds-lite-extlog-server)#
address 90.1.1.1 port 514
Step 22
end or commit
Example:
RP/0/RP0/CPU0:router(config-cgn-ds-lite-extlog-server)#
end
or
RP/0/RP0/CPU0:router(config-cgn-ds-lite-extlog-server)#
commit
Cisco IOS XR Carrier Grade NAT Configuration Guide for the Cisco CRS Router, Release 5.2.x
80
Implementing Carrier Grade NAT on Cisco IOS XR Software
Purpose
Configures the external-logging facility for the DS
LITE translation entries that can be logged in syslog
servers to analyze and debug the information.
Configures the logging server information for the IPv4
address and port for the server that is used for the
syslog based external-logging facility.
Configures the syslog server address and port number
to use for syslog based external logging facility for
DS LITE instance.
Saves configuration changes.
• When you issue the end command, the system
prompts you to commit changes:
Uncommitted changes found, commit them
before exiting (yes/no/cancel)?
[cancel]:
◦ Entering yes saves configuration changes
to the running configuration file, exits the
configuration session, and returns the
router to EXEC mode.
◦ Entering no exits the configuration
session and returns the router to EXEC
mode without committing the
configuration changes.
◦ Entering cancel leaves the router in the
current configuration session without
exiting or committing the configuration
changes.
• Use the commit command to save the
configuration changes to the running
configuration file and remain within the
configuration session.
OL-32659-01
Advertisement
Table of Contents
