Cisco GRS Configuration Manual page 5

Contents
OL-32659-01
Configuring the Policy Functions for the Carrier Grade NAT
Configuring Port Limit per Subscriber
Configuring the Timeout Value for the Protocol
Configuring the Timeout Value for the ICMP Protocol
Configuring the Timeout Value for the TCP Session
Configuring the Timeout Value for the UDP Session
Configuring the FTP ALG for NAT44 Instance
Configuring the RTSP ALG for NAT44 Instance
Configuring the PPTP ALG for a NAT44 Instance
Configuring the TCP Adjustment Value for the Maximum Segment Size
Configuring the Refresh Direction for the Network Address Translation
Configuring the Carrier Grade NAT for Static Port Forwarding
Configuring the Dynamic Port Ranges for NAT44
Configuring 1:1 Redundancy
Configuring Multiple Public Address Pools
Configuring Port Limit per VRF
Configuring Same Address Pool for Different NAT Instances
Configuring High Availability of Data Path Service Virtual Interface (SVI)
Configuring the Export and Logging for the Network Address Translation Table
Entries 57
Configuring the Server Address and Port for Netflow Logging
Configuring the Path Maximum Transmission Unit for Netflow Logging
Configuring the Refresh Rate for Netflow Logging
Configuring Session-Logging for a NAT44 or DS-Lite Instance
Configuring the Timeout for Netflow Logging
Configuring the Carrier Grade Service Engine
Bringing Up the CGSE Board
Configuring IPv4/IPv6 Stateless Translator (XLAT)
XLAT ServiceApp Configuration
XLAT Instance Configuration
Line Card Upgrade
71
UPGRADE FROM_ UBOOT to 559 & MANS FPGA to 0.41014
Configuring IPv6 Rapid Development
Ping to BR Anycast Address
Enable Additional 6rd Features
Cisco IOS XR Carrier Grade NAT Configuration Guide for the Cisco CRS Router, Release 5.2.x
30
30
32
33
36
38
39
46
47
48
50
61
65
67
67
69
69
70
72
75
75
32
35
41
42
44
52
55
57
59
63
71
v