Important Safety Information: Intrinsically Safe Radios; Fmrc Approved Equipment - Motorola GTX 2000 Service Manual

GTX/GTX LTR/LTS 2000 Portable Radios Service Manual

Important Safety Information: Intrinsically Safe Radios

FMRC Approved Equipment

Anyone intending to use a radio in a location where hazardous concentrations of flammable material exist (hazardous atmo-
sphere) is advised to become familiar with the subject of intrinsic safety and with the National Electric Code NFPA 70 (National
Fire Protection Association) Article 500 (hazardous [classified] locations).
An Approval Guide, issued by Factory Mutual Research Corporation (FMRC), lists manufacturers and the products approved
by FMRC for use in such locations. FMRC has also issued a voluntary approval standard for repair service ("Class Number
3605").
FMRC Approval labels are attached to the radio to identify the unit as being FM Approved for specified hazardous atmospheres.
This label specifies the hazardous Class/Division/Group along with the part number of the battery that must be used. Their Ap-
proval mark is shown below.
! !
W A R N I N G
Radios must ship from the Motorola manufacturing facility with the hazardous atmosphere capability and FM Approval label-
ing. Radios will not be "upgraded" to this capability and labeled in the field.
June 1999
Do not operate radio communications equipment in a hazardous atmosphere
unless it is a type especially qualified (e.g. FMRC Approved) for such use. An
explosion or fire may result.
Do not operate the FMRC Approved Product in a hazardous atmosphere if it has
been physically damaged (e.g. cracked housing). An explosion or fire may result.
Do not replace or charge batteries in a hazardous atmosphere. Contact sparking
may occur while installing or removing batteries and cause an explosion or fire.
Do not replace or change accessories in a hazardous atmosphere. Contact sparking
may occur while installing or removing accessories and cause an explosion or fire.
Do not operate the FMRC Approved Product unit in a hazardous location with
the accessory contacts exposed. Keep the connector cover in place when
accessories are not used.
Turn radio off before removing or installing a battery or accessory.
Do not disassemble the FMRC Approved Product unit in any way that exposes the
internal electrical circuits of the unit.
68P02945C75-A
Important Safety Information: Intrinsically Safe Radios
Foreword
xvii