Cisco UCS E-Series Installation Manual page 5

Table 4 M1 E-Series Servers Hardware at a Glance (continued)
UCS-E140S-M1
Feature Single-Wide E-Series Server
Router Platforms 2911, 2921, 2951, 3925, 3925e,
3945, 3945e, 4451-X
Maximum 2911 ISR G2—1 E-Series Server
Number of
2921 ISR G2—1 E-Series Server
E-Series Servers
2951 ISR G2—2 E-Series Servers
per Router
3925 ISR G2—2 E-Series Servers
3925e ISR G2—2 E-Series
Servers
3945 ISR G2—4 E-Series Servers
3945e ISR G2—4 E-Series
Servers
ISR 4451-X—2 E-Series Servers
1. All hardware drives within the E-Series Server must be installed with the same type of storage device; either all SAS drives or all SATA drives.
Hardware Information for the M2 E-Series Servers
The following table provides hardware information for the M2 E-Series Servers.
Table 5
UCS-EN120S-M2
Feature SM E-Series NCE
Form Factor Single-wide SM
CPU Pentium B925C
CPU Cores and 2 Core with 2.0 GHz Clock
CPU Clock Speed Speed
RAM 4 GB to 16 GB
Supports DDR3 1333 MHz
VLP UDIMM 1.5 V, 4 GB, and
8 GB
RAID RAID 0 and RAID 1
Storage Type SATA and SAS
OL-26447-03
UCS-E140D-M1 and
UCS-E160D-M1
Double-Wide E-Series Servers
2921, 2951, 3925, 3925e, 3945,
3945e, 4451-X
2911 ISR G2—None
2921 ISR G2—1 E-Series Server
2951 ISR G2—1 E-Series Server
Note The Cisco 2921 and 2951
ISR G2 support 4-cores
only.
3925 ISR G2—1 E-Series Server
3925e ISR G2—1 E-Series Server
3945 ISR G2—1 E-Series Server
3945e ISR G2—1 E-Series Server
ISR 4451-X—1 E-Series Server
M2 E-Series Servers Hardware at a Glance
UCS-E140S M2
Single-Wide E-Series Server
Single-wide SM
Intel Xeon
E3-1105C v2
4 Core with 1.8 GHz Clock
Speed
8 GB to 16 GB
Supports DDR3 1333 MHz VLP
UDIMM 1.5 V, 4 GB, and 8 GB
RAID 0 and RAID 1
SATA, SAS, SSD, and SED
UCS-E140DP-M1 and
UCS-E160DP-M1
Double-Wide E-Series Servers
with PCIe
2921, 2951, 3925, 3925e, 3945,
3945e, 4451-X
2911 ISR G2—None
2921 ISR G2—1 E-Series Server
2951 ISR G2—1 E-Series Server
Note
3925 ISR G2—1 E-Series Servers
3925e ISR G2—1 E-Series
Server
3945 ISR G2—1 E-Series Server
3945e ISR G2—1 E-Series
Server
ISR 4451-X—1 E-Series Server
UCS-E160D-M2 and UCS-E180D-M2
Double-Wide E-Series Servers
Double-wide SM
Intel Xeon
2418L v2 for 6 Core
2428L v2 for 8 Core
6 Core with 2.0 GHz Clock Speed
8 Core with 1.8 GHz Clock Speed
8 GB to 48 GB
Supports DDR3 1333 MHz RDIMM
1.35 V, 4 GB, 8 GB, and 16 GB
RAID 0 and RAID 1
SATA, SAS, SSD, and SED
Hardware Installation Guide for Cisco UCS E-Series Servers
Hardware Requirements
The Cisco 2921 and 2951
ISR G2 support 4-cores
only.
5