Replacing The Pcie Assembly In A Double-Wide E-Series Server - Cisco UCS E-Series Installation Manual

Replacing the PCIe Assembly in a Double-Wide E-Series Server

Replacing the PCIe Assembly in a Double-Wide E-Series Server
To replace the PCIe assembly, you must first remove the old assembly and then install the new one. See
the following topics for more information:
•
•
•
PCIe Assembly
The following figure shows the PCIe Assembly, which consists of a PCIe card; a flex assembly, which
connects the PCIe slot to the motherboard; and a plastic bracket, which slides over the end of the PCIe
card.
Figure 16
1
3
Hardware Installation Guide for Cisco UCS E-Series Servers
36
PCIe Assembly, page 36
Removing the PCIe Assembly, page 37
Installing the PCIe Assembly, page 38
PCIe Assembly
1
Plastic bracket
PCIe card
2
3
2 Flex assembly
OL-26447-03