Cisco UCS E-Series Installation Manual page 17

•
•
•
Maintenance Guidelines for E-Series Servers
The following maintenance guidelines apply to E-Series Servers:
•
•
•
•
•
Safety Warnings for E-Series Servers
The following safety warning statements apply to all hardware procedures involving E-Series Servers
for the Cisco ISR G2 and Cisco ISR 4451-X. Translations of these warnings are available in the Cisco
Network Modules and Interface Cards Regulatory Compliance and Safety Information document at:
http://www.cisco.com/en/US/docs/routers/access/interfaces/rcsi/IOHrcsi.html
IMPORTANT SAFETY INSTRUCTIONS
Warning
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you
work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar
with standard practices for preventing accidents. Use the statement number provided at the end of
each warning to locate its translation in the translated safety warnings that accompanied this device.
Statement 1071
SAVE THESE INSTRUCTIONS
Only trained and qualified personnel should be allowed to install or replace this equipment. Statement
Warning
1030
No user-serviceable parts inside. Do not open. Statement 1073
Warning
Warning Ultimate disposal of this product should be handled according to all national laws and regulations.
Statement 1040
OL-26447-03
Install the server away from heating, ventilation, and air-conditioning (HVAC) system, and other
large building air movers.
Install the rack away from areas that might be affected by external vibrations, such as a garage that
might have moving vehicles, or a factory with heavy machinary.
Do not install the server in a rack that will be placed in a moving vehicle.
Keep the router chassis area clear and dust-free during and after installation.
If you remove the chassis cover for any reason, store it in a safe place.
Do not perform any action that creates a hazard to people or makes equipment unsafe.
Keep walk areas clear to prevent falls or damage to equipment.
Follow installation and maintenance procedures as documented by Cisco Systems, Inc.
Recommended Safety Practices for Installing Cisco UCS E-Series Servers
Hardware Installation Guide for Cisco UCS E-Series Servers
17