Adjusting The Printing Location (Print Setting) - Sony UPX-C200 Operating Instructions Manual

Note
When you finish making adjustments, be sure to press
the MENU button to retrieve the Ready display. If the
Ready display is not retrieved, "COMMUNICATION
ERROR" appears on the LCD of the camera when
printing is to be executed, and printing cannot be
executed.
54
Various Functions
Adjusting the Printing Location
(PRINT SETTING)
Adjust so that a printed image is correctly located on the
print paper when the UPC-X46 series is used.
The printing location can be shifted by 0.5 mm.
1
1
DIGITAL PHOTO PRINTER
1
Turn on the printer.
2
Press the MENU button.
3
Press v or V of the control button to display
"PRINT SETTING [>>]".
4
Press B of the control button.
"PRINT OFFSET:" appears.
5
Press b or B of the control button to select the
offset value.
6
Press the EXEC button.
The offset value selected in step 5 is registered, and
the display returns to the PRINT SETTING [>>]
display.
Make a test printout and check if the image is printed in
the correct location on the print paper. If further
adjustment is needed, repeat the above steps.
For printing an image, see "Printing a Picture" on page
20.
To exit PRINT SETTING
Press the MENU button. The display returns to the
Ready display, and the printer is ready to print.
Note
When you finish making adjustments, be sure to press
the MENU button to retrieve the Ready display. If the
Ready display is not retrieved, "COMMUNICATION
ERROR" appears on the LCD of the camera when
printing is to be executed, and printing cannot be
executed.
2 3 4
MENU
EXEC
PRINT
ALARM
6 5