Sony UPX-C200 Operating Instructions Manual page 57

6
Press b or B of the control button to set the
POWER to ON.
7
Press the EXEC button.
"REBOOTING" appears. Then the printer is
restarted, and the Bluetooth lamp lights.
Turning off the Bluetooth lamp
Radio waves may affect medical equipment and aircraft
instruments, with possible severe consequences. It is
recommended to turn off the Bluetooth module power,
making sure the Bluetooth lamp goes dark to avoid such
trouble.
To turn off the Bluetooth lamp of the camera
1
Display the Setup display.
For details on displaying the Setup display, see
"Displaying the Setup display" on page 34.
2
Select Bluetooth by pressing v or V of the control
button.
3
Press ENTER of the control button.
4
Select MODULE by pressing v or V of the control
button.
5
Press ENTER of the control button.
The BT MODULE POWER display appears.
6
Check that OFF is selected, then press ENTER of
the control button.
The Bluetooth lamp goes dark.
To turn off the Bluetooth lamp of the printer
1
Press the MENU button.
2
Press V of the control button to display "Bluetooth
SETTING [>>]."
3
Press B of the control button.
"Bluetooth ADDR None" appears.
4
Press V of the control button to display "MODULE
POWER [>>]."
5
Press B of the control button.
6
Press b or B of the control button to set the
POWER to OFF.
7
Press the EXEC button.
"REBOOTING" appears. Then the printer is
restarted, and the Bluetooth lamp goes dark.
Adding printers
You can use up to three printers with the camera. When
printers are added to the system, you can select the
printer to be used with the PRINTER button of the
camera.
It is convenient that each printer have a device number
(from 1 to 9).
For details on adding printers and setting device names,
refer to the Operating Instructions (Advanced
Operations).
Removing printers
You can remove printers from the system.
For details on removing printers, refer to the Operating
Instructions (Advanced Operations).
57
Bluetooth