Setting The Frame (Frame) - Sony UPX-C200 Operating Instructions Manual

The display of the size toggles between black and
gray each time you press ENTER.
Note
The Guide Print-RGB and Guide Print-DLGm are
always displayed on the LCD. You cannot set them
not to be displayed.
6
When setting is finished, select RETURN by
pressing v or V of the control button.
7
Press ENTER of the control button.
The Setup display is retrieved.
42
Various Functions

Setting the Frame (FRAME)

Guidelines for adjusting the size and position of the
subject are helpful to decide on framing. This system
offers six types of guidelines, four fixed types, one for
upper and lower lines adjustable, and one for the width
of two vertical lines adjustable.
Fixed types
The following four fixed types of guidelines are
available.
FRAME-[1]
The dimension between the head and chin lines is
27 mm when you select the print size 10. 47 × 37 mm
or 11. 45 × 35 mm.
FRAME-[2]
Two chin lines are displayed. The dimension between
the head and chin lines is 1 inch or 1
select the print size 8. 54 × 54 mm 2x2inch.
8 mm (for print size 10)
7 mm (for print size 11)
27 mm
3
/ inch when you
8
7.5 mm
1inch
3
1 / inch
8
(25.5 mm)
(34.5 mm)