Reset Of Each Kind Setting Value - Sony UP-D70XR Service Manual

5-4. Reset of Each Kind Setting Value

All kind setting values are kept at EEPROM. If it is necessary, all kind setting values can be reset to
initial value.
1. Reset of EEPROM
Perform this reset when replacing EEPROM or MEC-11 board (has EEPROM).
How to Enter ......... After entering service mode, while [STOP] key is depressed, [ ↑ ] and [ ↓ ] keys
should be depressed in the ready condition of service mode (following picture) in
order.
READY
A4
or
LET
Content .................. following values are returned to the initial value.
user setting value : each value of COLOR ADJUST, GRAY ADJUST
printer condition : ribbon remaining, each error information, TOTAL PRINT
setting value
2. Reset when shipping product
User setting value, TOTAL PRINT, ribbon remaining quantity are changed.
How to Enter ......... After removing a ribbon cassette and a paper feed tray, while depressing
[PRINT], [STOP] and [MENU] keys simultaneously, POWER switch should be
turned on.
Content .................. Thermal head position should be set to 1. Following values (they are not adjusted
when shipping) are returned to initial value.
user setting value : each value of COLOR ADJUST and GRAY ADJUST
printer condition : ribbon remaining quantity, each error information, TOTAL
3. TOTAL PRINT reset
Total printing quantity of thermal head is returned to 0. When replacing thermal head, this reset
should be performed.
How to Enter ......... Total printing quantity is indicated from TOTAL PRINT item in service mode.
TOTAL = 10057
After that, [ ↑ ], [ ↓ ] and [PRINT QTY] keys should be depressed simultaneously.
5-12
QTY 1S
quantity, threshold value of sensor
: paper size, gamma selection, head voltage value, luminance
quantity of sensor
PRINT
UP-D70XR