Solving Problems - Uniden XDECT 7055 Owner's Manual

If you have any trouble with your phone, try these simple steps first. If
you still have a question, visit the website listed on the front cover.
If...
No stations can make
or receive calls.
One handset can't
make or receive calls.
A station can make
calls, but it won't ring.
A handset's display
won't turn on.
A handset is not
working.
A handset says
Unavailable.
No stations will
display any Caller ID
information.
Caller ID displays
briefly & then clears.
I can't transfer calls.
I can't get two
handsets to talk to the
caller.
The phone keeps
ringing if I answer on
an extension.
The answering system
does not work.
24

Solving Problems

Try...
Checking the telephone cord connection.
-
Disconnecting the base AC adapter. Wait a few
-
minutes, then reconnect it.
Moving the handset closer to the base.
-
Resetting the handset.
-
Making sure the ringer is turned on.
-
Making sure Do Not Disturb is turned off.
-
Charging the battery for 15-20 hours.
-
Checking the battery pack connection.
-
Charging the battery for 15-20 hours.
-
Checking the battery pack connection.
-
Resetting the handset.
-
Moving the handset closer to the base.
-
Seeing if another station has Privacy Mode on.
-
Making sure the base is plugged in.
-
Letting calls ring at least twice before answering.
-
Seeing if the call was placed through a switchboard.
-
Checking with your telephone service provider to
-
make sure your Caller ID service is active.
You may have to change the line mode. Visit the
-
website for more information.
Resetting all the handsets.
-
Making sure both handsets are registered to this
-
base.
Making sure no station is in Privacy Mode.
-
You may have to change the line mode. Visit the
-
website for more information.
Making sure the answering system is turned on.
-
Making sure the base AC adapter is plugged into a
-
continuous wall outlet (i.e., not controlled by a wall
switch).