Cleaning The Tool - Worx WG165 Instructions Manual

children and animals.
1. ASSEmBLy tHE wALL mOuNt
BRACkEt
Tighten all the screws securely. Carefully check
the bracket after mounting to make sure that
no movement can occur during use. (Fig. E1).
wARNiNG! Always make sure your
wall-mount bracket is securely mounted
to the wall. Failure to do so could result in an
accident, resulting in possible serious personal
injury.
2. StORiNG yOuR BLOwER
The blower can be stored into the wall mount
bracket (7) as illustrated (See E2).
Store in a dry place where your blower can be
protected from damage.

CLeAnInG THe TOOL

Clean the tool regularly.
wARNiNG! Keep your product dry.
Under no circumstances spray with
water.
- To clean the tool, use only mild soap and a
damp cloth.
wARNiNG! Do not use any type of
detergent, cleaner or solvent which may
contain chemicals that could seriously damage
the plastic.
- Self lubricating bearings are used in your
product, therefore lubrication is not required.
24V Cordless Li-ion Blower/Sweeper
11 11
en