Motorola DS3508 Manual page 272

Modifier Characters (Continued)
Table B-3
Code Type Option Value
D 2 of 5 0
Example: A D 2 of 5 bar code 4123, is transmitted as ]S04123
UPC/EAN 0
1
2
3
4
Example: A UPC-A bar code 012345678905 is transmitted as ]E00012345678905
Bookland EAN 0
Example: A Bookland EAN bar code 123456789X is transmitted as ]X0123456789X
Code 11 0
1
3
GS1 DataBar
Family
Example: A GS1 DataBar-14 bar code 100123456788902 is transmitted as
]e001100123456788902.
EAN.UCC
Composites
(GS1 DataBar,
0
GS1-128,
2D portion of
1
UPC composite)
2
3
1
No options specified at this time. Always transmit 0.
Standard data packet in full EAN format, i.e. 13 digits for UPC-A,
UPC-E, and EAN-13 (not including supplemental data).
Two digit supplemental data only.
Five digit supplemental data only.
Combined data packet comprising 13 digits from EAN-13, UPC-A
or UPC-E symbol and 2 or 5 digits from supplemental symbol.
EAN-8 data packet.
No options specified at this time. Always transmit 0.
Single check digit
Two check digits
Check characters validated but not transmitted.
No option specified at this time. Always transmit 0. GS1 DataBar-14
and GS1 DataBar Limited transmit with an Application Identifier
"01".
Note: In GS1-128 emulation mode, GS1 DataBar is transmitted
using Code 128 rules (i.e., ]C1).
Native mode transmission.
Note: UPC portion of composite is transmitted using UPC rules.
Standard data packet.
Data packet containing the data following an encoded symbol
separator character.
Data packet containing the data following an escape mechanism
character. The data packet does not support the ECI protocol.
Data packet containing the data following an escape mechanism
character. The data packet supports the ECI protocol.
GS1-128 emulation
Note: UPC portion of composite is transmitted using UPC rules.
Data packet is a GS1-128 symbol (i.e., data is preceded with ]JC1).
Programming Reference
Option
B - 5