Scanning Sequence Examples; Errors While Scanning; Imaging Preferences Parameter Defaults - Motorola DS3508 Manual

5 - 2 Symbol DS3508 Product Reference Guide

Scanning Sequence Examples

In most cases scanning one bar code sets the parameter value. For example, to disable image capture
illumination, scan the Disable Image Capture Illumination bar code under
5-5. The digital scanner issues a fast warble beep and the LED turns green, signifying a successful parameter
entry.
Other parameters require scanning several bar codes. See these parameter descriptions for this procedure.

Errors While Scanning

Unless otherwise specified, to correct an error during a scanning sequence, just re-scan the correct parameter.

Imaging Preferences Parameter Defaults

Table 5-1 lists the defaults for imaging preferences parameters. To change the default values, scan the appropriate
bar codes in this guide. These new values replace the standard default values in memory. To recall the default
parameter values, scan the
NOTE See
miscellaneous default parameters.
Imaging Preferences Parameter Defaults
Table 5-1
Parameter
Imaging Preferences
Operational Modes
Image Capture Illumination
Gain / Exposure Priority for Snapshot Mode
Snapshot Mode Timeout
Snapshot Aiming Pattern
Image Cropping
Crop to Pixel Addresses
Image Size (Number of Pixels)
Image Brightness (Target White)
JPEG Image Options
JPEG Target File Size
Set Default Parameter on page
Appendix A, Standard Default Parameters
4-4.
for all user preferences, hosts, symbologies, and
Parameter
Number
N/A N/A
F0h 69h Enable
F1h 32h Autodetect
F0h 43h 0 (30 seconds)
F0h 2Ch Enable
F0h 2Dh Disable
F4h F0h 3Bh; 0 top
F4h F0h 3Ch; 0 left
F4h F0h 3Dh; 479 bottom
F4h F0h 3Eh 751 right
F0h 2Eh Full
F0h 86h 180
F0h 2Bh Quality
F1h 31h 160 kB
Image Capture Illumination on page
Default
Page
Number
5-4
5-5
5-6
5-7
5-7
5-8
5-9
5-10
5-11
5-11
5-12