Fn1 Substitution Values; Scan Data Transmission Format (Continued) - Motorola DS3508 Manual

Scan Data Transmission Format (continued)

<PREFIX> <DATA> <SUFFIX 2>
(06h)

FN1 Substitution Values

Key Category Parameter # 67h
Decimal Value Parameter # 6Dh
The Wedge and USB HID Keyboard hosts support a FN1 Substitution feature. Enabling this substitutes any FN1
character (0x1b) in an EAN128 bar code with a value. This value defaults to 7013 (Enter Key).
When using host commands to set the FN1 substitution value, set the key category parameter to 1, then set the
3-digit keystroke value. See the ASCII Character Set table for the current host interface for the desired value.
To select a FN1 substitution value via bar code menus:
Scan the bar code below.
1.
Locate the keystroke desired for FN1 Substitution in the ASCII Character Set table for the current host
2.
interface. Enter the 4-digit ASCII Value by scanning each digit in
To correct an error or change the selection, scan Cancel.
To enable FN1 substitution for USB HID keyboard, scan the Enable FN1 Substitution bar code on page 4-31.
User Preferences & Miscellaneous Digital Scanner Options 4 - 31
<PREFIX> <DATA> <SUFFIX 1> <SUFFIX 2>
Set FN1 Substitution Value
<PREFIX> <DATA> <SUFFIX 1>
(05h)
(07h)
Appendix D, Numeric Bar Codes.