Timeout Between Decodes, Same Symbol; Timeout Between Decodes, Different Symbols - Motorola DS3508 Manual

Timeout Between Decodes, Same Symbol

Parameter # 89h
Use this option in presentation mode and Continuous Bar Code Read to prevent the beeper from continuously
beeping when a symbol is left in the digital scanner's field of view. It is programmable in 0.1 second increments
from 0.0 to 9.9 seconds. The default interval is 0.5 seconds.
To select the timeout between decodes for the same symbol, scan the bar code below, then scan two numeric bar
codes from Appendix D, Numeric Bar Codes

Timeout Between Decodes, Different Symbols

Parameter # 90h
Use this option in presentation mode and Continuous Bar Code Read to control the time the scanner is inactive
between decoding different symbols. It is programmable in 0.1 second increments from 0.1 to 9.9 seconds. The
default is 0.2 seconds.
To select the timeout between decodes for different symbols, scan the bar code below, then scan two numeric bar
codes from Appendix D, Numeric Bar Codes
Timeout Between Decodes, Different Symbols
User Preferences & Miscellaneous Digital Scanner Options 4 - 23
that correspond to the desired interval, in 0.1 second increments.
Timeout Between Decodes, Same Symbol
that correspond to the desired interval, in 0.1 second increments.