Operation Instructions - Landa HOT 2-1100 Operator's Manual

89172080-10
STEP 1: STOP! Read opera-
tor's manual before operating this
ma chine. Failure to read operation
and warn ing in struc tions may re-
sult in personal in ju ry or prop er ty
damage. Connect water supply
hose to inlet con nec tor and turn
water on.
Brass Soap Nozzle
High
Pressure
Nozzle
Variable Pressure
Control Handle
89172080-13
Selection of high or low pressure is accompanied by
turn ing the han dle. Note: High pressure nozzle must
be in sert ed at end of wand to obtain high pressure.
To apply soap, read detergent instructions.
INSULATED STRAIGHT WAND ASSEMBLY
Nozzle Extension
Gun/Wand
Attach the high pressure hose to
the spray gun using tefl on tape on
hose threads. Attach nozzle exten-
sion to spray gun/wand. Tighten
both by hand.

OPERATION INSTRUCTIONS

STEP 2: On machines with vari-
able pres sure wands, grip spray
gun securely. Then turn the vari-
able pressure control han dle coun-
terclockwise to reduce pressure.
Variable Pressure
Wand (VP)
Trigger
Pressure or Soap
Nozzle
Spray
Before installing nozzle, turn on
water supply and run machine
allowing water to fl ush through the
system until clear.
8.917-208.0 • HOT Operator Manual • Rev. 03/12
Pump/Burner
Pump
Switch
89172080-11
STEP 3: Before installing nozzle,
turn on water supply and run
machine, allowing water to fl ush
through the system until clear.
Turn pump switch ON or turn knob
to pump po si tion. When a steady
stream of water fl ows from the
spray gun and wand, the ma chine
is ready for the nozzle to be in-
stalled. Turn the vari able pres sure
control handle clockwise to raise
the pressure. For hot water wash-
ing, turn the burner switch ON or
turn knob to the burn er position.
(The burner will light automati-
cally.)
Pressure or Soap
Nozzle
Wand
Coupler
Coupler
Collar
Pull spring-loaded collar of the
wand coupler back to insert your
choice of pressure nozzle or soap
nozzle. Release the coupler collar
and push the nozzle until the collar
clicks. Pull the nozzle to make
sure it is seated properly.
Knob
Burner
Switch
89172080-12
Wand
Coupler
9