Cooking With Delayed Start And Chosen Cooking End Time - Asko OP8620 Instructions For Use Manual

Using your appliance
Cooking with delayed start and chosen
cooking end time
Cooking with delayed start and chosen
cooking end time
1
After setting the cooking time,
press the "
until the end of cooking indicator
flashes " ".
The display flashes to indicate that you can
now adjust the setting.
2
Press the + or - button to set the
desired cooking end time.
Example: end of cooking at 13:00.
The cooking end time is automatically
recorded after a few seconds.
The cooking end time display stops
flashing.
After these 2 steps, the oven heating is
delayed so that cooking ends at 13:00.
" button
At the end of cooking (end of programmed
time),
- the oven turns off,
- the cooking time indicator and 0:00 both
flash,
- a series of beeps sounds for a few
minutes.
Press any button to stop the beeping.
The display shows the time once again
when the function selector switch is
returned to 0.
The light inside the oven turns on when
cooking starts and goes out when cooking
stops.
13