Pakedge Device & Software RB-KIT Installation Manual page 10

1.2 GETTING TO KNOW THE RT-50S
Restore to Factory Defaults
Due to the nature of an enterprise gateway/security appliance, a standard reset to factory default button
does not exist. Since the RT-50S is preconfigured, chances are a factory reset will not be required. However
if for some reason this reset is needed, please contact Pakedge support for assistance.
Power Plug
To be compatible with electric service standards around the world, the switch is designed with a power
supply in the range from 100 to 240VAC, 50/60Hz. Please make sure that your outlet standard is within
this range. To power the switch, plug the female end of the power cord firmly into the receptacle of the
switch and the other end into a power outlet. After the power cord is plugged in, the power LED should be a
solid green to indicate normal power status.
RB-KIT INSTALLATION MANUAL
9