Roland VXpanded VS-880 Application Manual page 88

(Use {Move} To Place Guitar Part in New Location, Continued)
9. Use the TIME/VALUE dial to select the Virtual Track that you want to move.
10. Press [CURSOR>].
11. Press the [CH EDIT] button that corresponds to the Track you want to move this section of
the music to (this can be the same as the source Track).
12. Use the TIME/VALUE dial to select the Virtual Track that you want to move the section to.
13. Press the right [PARAMETER>>] button, "TRK St.=" should be displayed.
14. Press [LOC 1].
15. Press the right [PARAMETER>>] button, "TRK Frm=" should be displayed.
16. Press [LOC 2].
17. Press the right [PARAMETER>>] button, "TRK End=" should be displayed.
18. Press [LOC 3].
19. Press the right [PARAMETER>>] button, "TRK To=" should be displayed.
20. Press [LOC 4].
21. Press the right [PARAMETER>>] button, "Track Move OK ?" should be displayed.
22. Press [YES] to complete the {Move} command.
Moving within the same track.
Moving to a different track.
Moving using the "Frm" setting.
A
Start End To
B
Start End To
C
Start End To
From
A
Time
B
Time
C
Time
Chapter 5: Editing Applications
87