Roland VXpanded VS-880 Application Manual page 112

(Generating a Sync Track from Start & End Times, Continued)
8. Press the right [PARAMETER>>] button until "SYS CV4:Measure=" is displayed and
use the TIME/VALUE dial to select the number of measures in your song.
9. Press PARAMETER>> until "SYS CV4:Beat=" is displayed and use the TIME/
VALUE dial to select the number of beats in each measure.
10. Press [YES/ENTER]. "Overwrite Tempo?" will be displayed, press [YES/ENTER]
and a Sync Track will be created.
The Sync Track offset allows you to start your Sync Track at a time other
than 00h00m00s00f (since most recordings do not actually begin at this
time). Set the offset to match the time location where your recording
actually begins.
Offsetting the Sync Track
1. Press SYSTEM until "SYS Sync/Tempo" is displayed. Press [YES/ENTER].
2. Press PARAMETER>> until "SYS Ofs=" is displayed and use the TIME/VALUE dial
to select the time location for the beginning of the Sync Track (you can also use
locate points or the numeric buttons to do this).
3. Press [PLAY/DISPLAY] to return to Play condition.
Chapter 6: Mixdown Applications
111