Precor C960 Service Manual page 27

Diagram 4.5 - Safety Switch Assembly
10. Line up the tabs on the display housing with the holes on the display housing mounting
plate.
11. Gently press the display housing onto the mounting plate until the tabs are pushed into the
holes.
12. Attach the safety clip to your clothing at waist level, then watch the safety switch as you step
backwards.
13. If the safety switch tripped before the safety clip came off your clothing...
THEN...
The safety switch is adjusted correctly;
continue with the next step.
14. Replace the three screws that secure the upper display housing to the display housing
mounting plate.
C960 Series Commercial Treadmill
OTHERWISE...
Return to Step 5.
Page 27