Procedure 2.3 - Selecting Club Settings - Precor C960 Service Manual

Procedure 2.3 - Selecting Club Settings

Selecting United States standard units causes information to be displayed in feet and pounds.
Information is displayed in meters and kilograms if metric units are selected.
Procedure
1. Plug the power cord into the wall outlet, then position the safety switch at the green dot.
Turn on the treadmill by using the circuit breaker.
At the PRESS ENTER FOR PROGRAMS prompt, press and hold all three CHANGE keys
2.
simultaneously or keys RESET,5,6,5,1,5,6,5 sequentially on units with standard access
codes until the CHOOSE UNITS [YES/DN NO/UP] prompt is displayed.
3. Use any or
With the MAX SPEED prompt displayed, use the
4.
limit. Press ENTER when the desired speed appears.
Note:
For 110-volt treadmills, the maximum workout speed limit is between either 1 and 10 MPH or 1
and 16 KPH. Maximum workout speed limits for 220-volt treadmills range between 1 and 12
MPH or 1 and 20 KPH.
With the MAX WORKOUT prompt displayed, use the
5.
time limit between 10 and 240 minutes. Press ENTER when the desired time appears.
IMPORTANT
On PWM C960 Series Treadmills, you may choose either English, Spanish, German or French
language options.
The MODIFY CUSTOM prompt is displayed. If you plan to customize the program...
6.
THEN...
Press any key, then press
ENTER to return to the PRESS
ENTER FOR PROGRAMS prompt.
Note:
Instructions for designing custom courses are provided in the C964 Owner's Manual.
key to select either the U. S. Standard or Metric measurement system.
C960 Series Commercial Treadmill
or keys to designate a workout speed
or keys to designate a workout
OTHERWISE...
Press any key, then press ENTER
tto return to the PRESS ENTER FOR
PROGRAMS prompt.
Page 15