Unit Operation; Inserting A Dvd Or Cd; Playing A Disc; Pausing Playback (Still Mode) - Audiovox PVS72901 Owner's Manual

Turning the Unit On
1. Push the / ON switch on the top side of the unit to the "ON" position.
2. Set the AV IN / DVD switch on the Unit to DVD. (If you are using Unit B, there is no
AV IN / DVD switch.) The DVD logo (start-up picture) will appear on the screen.
3. After use, push the / ON switch to the "
1. Open the disc door
Push and hold the OPEN knob to open the disc door.
Push & hold the OPEN knob on the left side.
3. Close the disc door.
It takes a short while for your unit to load the disc. After loading, the unit will automatically bring you to the main
menu of the disc or start playing the disc.
4. If the unit does not automatically start playing the disc, press the
DVD CD
Basic playback
This owner's manual explains the basic instructions for operating this unit. Some DVDs are produced in a
manner that allows specific or limited operation during playback. Therefore, this unit may not respond to all
operating commands. THIS IS NOT A DEFECT. Please refer to the instructions accompanying the specific
DVD in question for more information about the options available on that DVD.
" " may appear on the screen during operation. A "
by the unit or disc.

Playing a Disc

1. Push the / ON switch on the top side of the unit to the ON position.
See CUSTOMIZING THE FUNCTION SETTINGS before proceeding to step 2.
2. Open the disc door.
3. Hold the disc by its sides and carefully place it onto the spindle with the label side facing up, pushing gently until you
hear a "click".
4. Close the disc door.
It takes a short while for your unit to load the disc. After loading, the unit will automatically bring you to the main
menu of the DVD or start playing the DVD.
5. If the unit does not automatically start playing the DVD, press the

Pausing Playback (Still Mode)

Press the button. To resume normal playback, press the
Each time you press the button, the picture advances one frame.

UNIT OPERATION

(STANDBY)" position.

INSERTING A DVD OR CD

2. Hold the disc by its sides and carefully place it onto the
spindle with the label side facing up; push gently until
you hear a "click".
Note:
When gently pulling
the LCD screen
cover outward, be
careful not touch
the screen.
PLAYING A DISC
" means that the desired operation is not permitted
button.
GB - 13
button.
button.