Playing A Disc; Stopping Playback; Fast Forward/Fast Reverse; Skip (Forward/Reverse) - Audiovox PVS72901 Owner's Manual

DVD CD
Basic playback

Stopping Playback

Press the button at the location where you want to interrupt playback. To resume playback at the position where the
disc was stopped, press the
If you press the button twice, the unit's memory will be cleared and pressing the
beginning.
Fast Forward / Fast Reverse
1. Press and hold the or
the or button for more than 2 seconds, the playback speed changes in the following sequence:
x 2
2. Press the button when you reach the desired point to resume normal playback .
Notes:
• The DVD player mutes sound and subtitles during reverse and forward scan of DVD video discs.
• The fast playback speed may differ depending on the disc.
Skip (Forward / Reverse)
Press and hold the button for more than 2 seconds to advance chapters/tracks.
Press and hold the button for more than 2 seconds to go back to current or previous chapters/tracks.

Audio Selection

On some DVD video discs, the sound is recorded in two or more formats. Follow the directions below to select the
preferred language and sound system.
1. While a disc is playing, press the AUDIO button to show the current audio format
number.
2. Press the AUDIO button repeatedly to select the desired audio format.
Notes:
• If only one audio format is recorded on the DVD video disc, the number does not change.
• Some DVD video discs allow you to change audio selections only via the disc menu. If this is the case, press the
MENU button and choose the appropriate language on the disc menu.
• You can select different audio channels (Stereo, Left or Right) on an Audio CD by pressing the AUDIO button
repeatedly.
DVD

Subtitle Selection

1. While a DVD is playing, press the SUBTITLE button to display the current language setting, as
shown in the example.
2. Press the SUBTITLE button repeatedly to select the desired subtitle language. You can turn subtitles off by pressing
the SUBTITLE button repeatedly until the "
Notes:
• Some DVD video discs are set to display subtitles automatically, and you cannot turn them off even if you set the
subtitle function to off.
• During some scenes, the subtitles may not appear immediately after you select your desired scene.
• The number of subtitle languages recorded differs depending on the disc. If only one language is recorded, the
language does not change.
• This function can only be used for discs on which subtitles have been recorded in multiple languages.
• Some DVD video discs allow you to change subtitles only via the disc menu. If this is the case, press the MENU
button and choose the appropriate subtitle on the disc menu.

Adjust the LCD Screen

In play mode, you can adjust Brightness, Contrast, Color or View Mode of the LCD screen.
1. Press the SETUP button when the DVD player is in play mode.
2. Press the / button to select Brightness, Contrast, Color or View Mode.
3. Then press the / button to change the setting. (For View Mode, press the
Note:
• For the LCD screen of Unit A, you can also adjust Brigntness, Color or View Mode by the BRIGHTNESS, COLOR
control or SCREEN(WIDE / NORMAL) switch.

PLAYING A DISC

button.
button for more than 2 seconds when a disc is playing. Each time you press and hold
x 4 x 8 x 16
Off
" is displayed.
GB - 14
button will reset the disc to the
x 2 x 4 x 8
button to change the setting.)
x 16
1/4