Figure 5.9: Wizard - Step 4: Change Password Dialog Box; Table 5.5: Wizard - Add User Dialog: Field Names And Definitions - Avocent Cyclades ACS Installation/Administration/User Manual

48 Cyclades ACS Advanced Console Server Installation, Administration and User Guide
The following table defines the information required in the fields.

Table 5.5: Wizard - Add User Dialog: Field Names and Definitions

Field name
User Name
Password and Repeat
Password
Group
[dropdown list]
Shell
Comments
If you click the Change Password button, the following dialog box appears.

Figure 5.9: Wizard - Step 4: Change Password Dialog Box

To add a user:
1. Select Step 3: Access. The Access form displays.
2. Click Add. The Add User dialog box appears.
3. Enter the user name and password in the User Name and Password fields and enter the
password again in the Repeat Password field.
4. Select from the Group menu options.
a. To create a regular user account without administrator privileges, select Regular User
[Default] from the Group pull-down menu.
Definition
The user name for the account being added.
The password for the account.
The choices in the Group menu are Regular User [Default] or Admin.
NOTE: To configure a user to be able to perform administrative functions, select
the Admin group. To define a new group, go to the Expert mode and select
Security - Users and Groups.
Select whether the user of this group is a NonBio [Default] or a BioUser. The
BioUser group should only be selected if authentication will be made through
Cyclades biometric authentication.
Optional. The default shell when the user makes an SSH or a Telnet
connection. Choices are: sh [Default] or bash.
Optional notes about the user's role or configuration.