Common Features Of Administrator Forms; Figure 4.1: Administrator - Web Manager Buttons; Table 4.2: Description Of Administrator Web Manager Buttons - Avocent Cyclades ACS Installation/Administration/User Manual

34 Cyclades ACS Advanced Console Server Installation, Administration and User Guide
Table 4.1: Administrator - Common Administrative Tasks (Continued)
Task
Set up logging of system messages to a
syslog server.
Configure devices for IPMI power management.
Select an authentication method for accessing
connected devices.
Configure packet filtering.

Common Features of Administrator Forms

The following figure shows the control buttons displayed at the bottom of the form when logged
into the Web Manager as administrator.

Figure 4.1: Administrator - Web Manager Buttons

The following table describes the uses for each control button.

Table 4.2: Description of Administrator Web Manager Buttons

Button name
back
try changes
cancel changes
apply changes
reload page
Help
next
unsaved changes
no unsaved changes
Where documented
To specify names, alarms, syslogging and over
current protection for IPDUs: on page 65
To configure syslogging for serial ports and specify
message filtering: on page 82
IPMI Power Management on page 70
Authentication on page 117
Firewall Configuration on page 99
Use
Only appears in Wizard mode. Returns the previous form.
Tests the changes entered on the current form without saving them.
Cancels all unsaved changes.
Applies and saves all unsaved changes.
Reloads the page.
Displays the online help.
Only appears in Wizard mode. Goes to the next form.
The unsaved changes button appears on the lower right hand corner of the
Web Manager and a graphical LED blinks red whenever the current user
has made any changes and has not yet saved the changes.
The no unsaved changes button appears and a graphical LED appears in
green when no changes have been made that need to be saved.