Avocent ACS1 Quick Installation Manual

The following instructions will help you
install and use your console server.
Should you require further assistance, please
contact Avocent Technical Support.
1
Rack mounting the console server.
For detailed rack mounting instructions, see
the installer/user guide.
2
Connecting to your network
Connect a CAT 5 cable from the 10/100BaseT
port to your network.
3
Connecting devices
Using CAT 5 cables and DB9 or DB25 console
adaptors, connect the appropriate serial devices
to the serial ports on the console server.
NOTE: The Cyclades ACS16 and ACS32
DC-powered console servers are NEBS level
3 certified. To comply with NEBS certification
requirements, shielded cables are required
when connecting devices to the console and
serial ports.
4
Connecting to the Console port
Using one of the supplied RJ-45 console
adaptors, connect a terminal or server to the
Console port on the console server. The console
server will be configured using a terminal or
terminal emulator with session settings of:
9600, 8, N and 1, with no flow control.
To Contact Avocent Technical Support
Avocent, the Avocent logo, The Power of Being There and Cyclades are registered trademarks of Avocent Corporation or its affiliates. ©2006 Avocent Corporation. All rights reserved.

Quick Installation Guide

Cyclades
Advanced Console Server
To install the ACS advanced console server
5
Connecting
the power.
CALL (888) 793-8763 VISIT www.avocent.com/support
The Power of Being There
ACS
®
Remote User
3
Connecting
devices.
Device with Console Port
®
Internet
2
Connecting to
your network.
4
Connecting the
console server.
Console User
DOWNLOAD www.avocent.com
590-666-501A