Connecting This Router To A 3G/4G Modem - Sapido RB-1232V2 Quick Installation Manual

Connecting this Router to a 3G/4G modem :

(RB-1800/RB-1802 are not supported)
※The quality of wireless signal depends on strength of 3G/4G signal.
※Please find update support list at SAPIDO offical website.
1. Open IE browser, type IP 192.168.1.1(P1), or open
"My Network Place", and click SAPIDO_GR-1733 (P2).
192.168.1.1
(P1)
3. Please confirm the "Operation Mode" is default Router Mode, and
select "One Button Setup"(P4) on the left menu.
4. Select "WAN Interface" is 3.5G USB dongle, and starts the setup and wireless encryption.
5. After the setting is finished, you should see a "change successful" page with a countdown. When the countdown
is completed, your wireless network and security will be active, and you should be able to login immediately with
the new password. However, if an error message shows up, please refresh the page and it will go back to the
entering page. Afterwards, you can access Internet.
It can be configured without Internet.
2. Fill in default Username and Password to
login(P3).
SAPIDO_GR-1733
(P2)
admin
admin
(P3)
(P4)
10