Before adjusting, ALWAYS turn the motor switch OFF and check that the motor has already stopped.
6.12 Metering device (VF2404, 2504)
6.12.1 Presser foot tape guide
Set the presser foot tape guide ① depending on the needle
distance and a part to be sewn on a tape.
Loosen the screw ② to adjust it.
6.12.2 Setting tape guide
(1) Set the tape guide bar(long) ③ to a low position enough
for sewing.
(2) Set the inside of the tape guide, c. set ④ along "A" on
the presser foot tape guide ① . Set the tape guide ⑤
to guide a tape smoothly depending on a tape width.
(3) After positioning the tape guide bar(long) ③ , loosen
the screw ⑥ to position the tape guide stopper ⑦ . It
prevents the needle bar from touching the tape guide,
c. set ④ and makes the position of the tape guide
bar(long) ③ .
②
Fig. 6-34
①
④
③
Fig. 6-35
⑦
⑥
Fig. 6-36
35
6. Adjustments
①
A
⑤
③
VF2400