-
Plug in the line cable(connector
-
Replace the panel.
4.12.1.2.2 Attaching the handset cable:
-
Turn the terminal
-
Plug in the handset cable (connector
4.12.1.2.3 Wall mounted
Preparing Premium Reflexes terminals
-
Turn the terminal
-
Use a screwdriver to remove the two upper rubber feet.
Preparing Advanced Reflexes terminals
-
Turn the terminal
-
Use a screw driver to remove only the left rubber foot.
Mounting the terminal
-
Use the bracket as a drilling template; use the wallplugs and screws provided to attach the
bracket.
) and position it as shown in the illustration below.
) into the guide intended for this purpose.
4-95