Stations Default Configuration; Detailed Description - Alcatel-Lucent OmniPCX Office Installation Manual

5.1

Detailed description

5.1.1 DEFAULT CONFIGURATION
5.1.1.1 Alcatel-Lucent IP Touch 4038 Phone, Alcatel-Lucent IP Touch 4068 Phone
and Alcatel-Lucent 4039 Digital Phone sets
Each of these sets has 2 programmable keys (F1/F2) and 40 virtual add-on keys. Their default
functions depend on:
- The configuration of the set (Operator, Manager, Assistant, Normal or Attendant)
- The market in which the set is sold (US or non-US)
- The operating mode of the set (KeySystem or PABX mode)
The default functions of the F1/F2 keys are summarized in the table below (they are the same
for KeySystem and PABX modes).
Market
Non-US
US
The default functions of the virtual keys are summarized in the figures below (separate figures
are provided for the US market). The virtual keys are selected using 8 physical buttons, 4 on
each side of the set's display. There are 5 pages of virtual keys (the pages can be scrolled
through using the up/down buttons of the set's 4-way navigator), with 8 virtual keys on each
page. Each of the following figures shows the first page of virtual keys and then indicates the
progression to the last (fifth) page of virtual keys.
table 5.1: F1/F2 Key Functions
Set Configuration
Operator
Manager
Secretary
Normal
Operator
Manager
Secretary
Normal
Key F1
Normal/Restricted Mode
Secretary
Manager
Call
Manual Hold
Manual Hold
Manual Hold
Manual Hold
Key F2
Operator Diversion
Screening
Screening
Call
Transfer
Transfer
Transfer
Transfer
5-1