6. USING THE OPERATION PANEL (ADVANCED OPERATIONS)
6
Next, set the work clamp height.
7
Next, set the intermediate work clamp height (only
when memory switch no. 003 is "ON").
8
9
End user program recording mode.
43
THREAD/CLAMP indicator flashes
THREAD/CLAMP indicator flashes
TEST indicator lights
Menu indicators flash
TEST indicator switches off
Menu indicators light
KE-430D, BE-438D
Press the SELECT key.
Press the
or
key to set the desired work clamp
height.
Press the SELECT key.
Press the
or
key to set the desired intermediate work
clamp height.
Press the SELECT key.
• If setting further user programs, select the user program
number and then repeat steps 2 to 8.
Press the TEST key.
This completes the recording of a user program.
• The user program number will flash in the PROGRAM
No. display, and the sewing machine will switch to home
position detection standby.
4476Q
4477Q
4478Q
4479Q