Brother KE-430D Instruction Manual page 51

<Using a user program>
• If you press the SELECT key (3), you can check the settings for the displayed user program (such as X-scale, Y-scale and
sewing speed).
<Clearing a user program>
1
2
Clearing all user programs
6. USING THE OPERATION PANEL (ADVANCED OPERATIONS)
1. Press the
number that you would like to use.
• If the user program number is flashing, depress the
• User programs U1 to U10 can be selected directly
2. Check that the needle drop position is correct, and then
start sewing. (Refer to "5-5. /5-6. Checking the sewing
pattern".)
4480Q
While pressing the TEST key, press the SELECT key.
• Switch to user program recording mode. Check that
• User program number will appear in the PROGRAM
Press the
number which is to be cleared of data.
TEST indicator lights
Menu indicators flash
Press the RESET key.
• The buzzer will sound and the user program with the
Note:
If a cleared user program has been stored as part of a
cycle program, the step that involves that user program
will become blank. The cycle program itself will not be
cleared.
Press and hold the RESET key for 2 seconds or more.
• The buzzer will sound and the all user programs will be
Note:
If any cycle programs have been memorized, all of the
memorized cycle programs will also be cleared.
KE-430D, BE-438D
or key (1) to select the user program
foot switch to move the feed mechanism to the home
position. After this, it is not necessary to detect the
home position until the next time the power is turned
off and back on, even if you change the user program
number.
using function keys F1 to F4 (2). (Refer to "6-8. Direct
selection".)
the menu indicators are flashing.
No. display, and the program number will appear in the
menu display.
or key to select the user program
number selected will be cleared.
cleared.
4478Q
44