Connecting To Your Tv - RCA RTS202 User Manual

Connections and Setup

Connecting to your TV

Method 1
Component video jacks (Pr, Pb, Y)
EN
green, blue and red.
supplied) are required to provide best picture
quality. They are usually color-coded green,
blue and red.
the receiver to the component video IN jacks
on your TV so the video content goes from
the receiver to the screen.
Method 2
Composite video jack (yellow)
connection for good picture quality.
the IN jack on your TV so the video content
goes from the receiver to the screen.
television, use the unit's progressive
scan output to get the highest possible
video resolution. Set the Progressive Scan
option in the Video menu to On.
that all the cables have been inserted
properly into the jacks.
for audio (mono), connect it to the left
(white L/Mono) audio jack on the TV and
don't connect the right audio part of the
cable.
4
RCA RTS202 ib.indd 4
Method 3
HDMI
Interface. HDMI transfers digital audio and
uncompressed digital video on a single
cable.
to change output signals as follows: 480p,
720p, 1080i and 1080p.
connected TV as well.
connect to other analog video outputs.
Audio to PCM.
HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI licensing LLC.
6/6/2008 11:07:33 AM