Solutions When You Cannot Connect Using Screen Mirroring; Solutions When The Image Contains Static During Screen Mirroring Connection - Epson EB-1985WU User Manual

Solving Network Problems
• If the wireless connection is slow or your projected image contains
noise, check for interference from other equipment, such as a Bluetooth
device or microwave. Move the interfering device farther away or
expand your wireless bandwidth.
• Reduce the number of connected devices if the connection speed
declines.
Related Links
• "Solving Network Problems"
Solutions When You Cannot Connect Using Screen
Mirroring
If you are unable to connect to the projector using Screen Mirroring, try
the following solutions:
• Check the projector's settings.
• Select Screen Mirroring On as the Wireless Mode setting in the
projector's Network menu.
• Change the Display Name so that it does not include "-" in the
projector's Screen Mirroring Settings menu. If the Display Name
includes "-", it may not be displayed correctly on your mobile
device.
• Select Both Settings Off as the Wireless Mode setting in the
projector's Network menu, and select Screen Mirroring On again.
• Make sure the Screen Mirroring light turns blue and the Screen
Mirroring standby screen is displayed.
• Make sure no other mobile device is connected to the projector.
p.182
• Check the mobile device's settings.
• Make sure the settings on the mobile device are correct.
• When connecting again immediately after disconnecting, it may
take some time until the connection is established. Reconnect
after waiting for a while.
• Restart the mobile device.
• Once you have connected using Screen Mirroring, the projector
connection information may be recorded on the mobile device.
However, you may not be able to reconnect to the projector from
the recorded information. Select the projector from the list of
available devices.
• If your mobile device supports Intel WiDi and uses 5 GHz
Wireless LAN, you cannot connect using Screen Mirroring and
Wireless LAN at the same time. Turn off the Wireless LAN and
connect using Screen Mirroring.
Related Links
• "Solving Network Problems"
• "Projector Network Settings - Network Menu"
• "Network Menu - Screen Mirroring Settings"
Solutions When the Image Contains Static During
Screen Mirroring Connection
If the projected image contains static when connecting using Screen
Mirroring, try the following solutions:
• Try not to cover the Wi-Fi antenna of the mobile device.
• If you use a Screen Mirroring connection and an internet connection at
the same time, the image may stop or contains noise. Disconnect the
internet connection to expand your wireless bandwidth and improve the
connection speed of the mobile device.
• Make sure the projection contents meet the requirements.
p.182
p.142
p.143
183