Matching Multiple-Projector Display Quality - Epson EB-1985WU User Manual

Color Difference Correction when Projecting from Multiple Projectors
The current Projector ID is displayed on the projected screen. It
disappears after about 3 seconds.
b
While holding the [ID] button, press the number button that
matches the ID of the projector you want to operate.
The projector you want to operate is selected.
c
Press the [ID] button to check if the ID-setting process worked.
You see a message displayed by the projector.
• If the remote control is listed as On, you can operate the projector
from the remote control.
• If the remote control is listed as Off, you cannot operate the
projector from the remote control. Repeat the steps above to set the
ID to match the projector you want to control.
• You must select the projector ID from the remote control
a
each time you turn on the projector you have set it to
control.
• When you set the Projector ID setting to Off, you can
operate the projector using the remote control whichever ID
you select on the remote control.
• When you select 0 on the remote control, you can operate all
projectors regardless the Projector ID setting.
Related Links
• "Color Difference Correction when Projecting from Multiple Projectors"
p.90

Matching Multiple-Projector Display Quality

You can match the display quality of multiple projectors that will project
next to each other.
a
Turn on all the projectors on which you want to match the display
quality.
b
Set ID numbers on each projector.
91