Connecting To A Composite Video Source - Epson EB-1985WU User Manual

Projector Connections
a
Connect the component connectors to your video source's color-
coded component video output ports.
a
The ports usually labeled Y, Pb, Pr or Y, Cb, Cr. If you are
using an adapter, connect these connectors to your component
video cable.
b
Connect the VGA connector to a Computer port on the projector.
c
Tighten the screws on the VGA connector.
d
Connect the audio cable to your video source's audio-out ports.
e
Connect the other end of the cable to the projector's Audio port
that corresponds to the Computer port you are using for video.
If your image colors appear incorrect, you may need to change the Input
Signal setting in the projector's Signal menu.
Related Links
• "Connecting to Video Sources"
• "Input Signal Settings - Signal Menu"

Connecting to a Composite Video Source

If your video source has a composite video port, you can connect it to the
projector using a commercially available RCA-style video or A/V cable. You
can play sound through the projector's speaker system by connecting a
commercially available RCA audio cable.
a
Make sure the audio cable is labeled "No resistance".
a
Connect the cable with the yellow connector to your video
source's yellow video output port.
b
Connect the other end to the projector's Video port.
p.25
p.135
26