Color Difference Correction When Projecting From Multiple; Projectors; Setting The Projector Id; Selecting The Projector You Want To Operate - Epson EB-1985WU User Manual

Color Difference Correction when Projecting from Multiple Projectors
When you line up multiple projectors to project images, you can correct the
brightness and color tone of each projector's image with multi-screen color
adjustment so that the colors of images from each projector match closely.
When you make multi-screen color adjustments, set a unique projector ID
for each projector to operate them individually using a remote control, and
then correct the brightness and color for each projector.
a
In some cases the brightness and color tone may not match completely
even after correction.
Related Links
• "Adjusting Projector Features"
• "Setting the Projector ID"
• "Selecting the Projector You want to Operate"
• "Matching Multiple-Projector Display Quality"

Setting the Projector ID

If you want to control multiple projectors from a remote control, give each
projector a unique ID.
a
Press the [Menu] button on the control panel or remote control.
b
Select the Extended menu and press [Enter].
c
Select Projector ID and press [Enter].
d
Use the arrow buttons to select the identification number you
want to use for the projector. Then press [Enter].
p.69
p.90
p.90
p.91
e
Press [Menu] or [Esc] to exit the menus.
Repeat these steps for all the other projectors you want to operate from one
remote control.
Related Links
• "Color Difference Correction when Projecting from Multiple Projectors"
p.90

Selecting the Projector You want to Operate

After setting the projector's ID, select the ID for the projector you want to
operate using the remote control.
a
Aim the remote control at the target projector and press the [ID]
button.
90