Epson EB-1985WU User Manual page 171

Projector Light Status
Lights Status and solution
Power: Off Projector has overheated and turned off. Leave it
turned off to cool down for 5 minutes.
Status: Flashing blue
• Make sure that the vents and air filter are not
Lamp: Off
clogged with dust or obstructed by nearby objects.
Temp: Orange
• Clean or replace the air filter.
• If operating the projector at high altitude, set the
High Altitude Mode setting to On in the projector's
Extended menu.
s Extended > Operation > High Altitude Mode
• If the problem persists, unplug the projector and
contact Epson for help.
Power: Off Lamp has a problem.
• Check to see if the lamp is burned out, broken, or
Status: Flashing blue
installed incorrectly. Reseat or replace the lamp as
Lamp: Orange
necessary.
Temp: Off
• Clean the air filter.
• If operating the projector at high altitude, set the
High Altitude Mode setting to On in the projector's
Extended menu.
s Extended > Operation > High Altitude Mode
• If the problem persists, unplug the projector and
contact Epson for help.
Power: Flashing blue Replace the lamp soon to avoid damage. Do not
continue using the projector.
Status: Light status var‐
ies
Lamp: Flashing orange
Temp: Off
Power: Off A fan or sensor has a problem. Turn the projector off,
unplug it, and contact Epson for help.
Status: Flashing blue
Lamp: Off
Temp: Flashing orange
Lights Status and solution
Power: Off Internal projector error. Turn the projector off, un‐
plug it, and contact Epson for help.
Status: Flashing blue
Lamp: Flashing orange
Temp: Off
Power: Off Auto iris error. Turn the projector off, unplug it, and
contact Epson for help.
Status: Flashing blue
Lamp: Flashing orange
Temp: Flashing orange
Power: Off Power error (Ballast). Turn the projector off, unplug
it, and contact Epson for help.
Status: Flashing blue
Lamp: Orange
Temp: Flashing orange
Screen Mirroring light Status and solution
Blue Screen Mirroring is available.
Flashing blue quickly Connecting to a mobile device.
Flashing blue slowly Screen Mirroring error. Select Both Settings Off as
the Wireless Mode setting in the projector's Network
menu, and select Screen Mirroring On again.
Off Screen Mirroring is not available. Check that the
Wireless Mode setting is set to Screen Mirroring On
in the projector's Network menu.
a
If the lights display a pattern not listed in the table above, turn the
projector off, unplug it, and contact Epson for help.
Related Links
• "Solving Problems"
p.168
• "Cleaning the Air Filter and Vents"
• "Replacing the Air Filter"
p.160
171
p.160