Copy Menu Settings To Another Projector (Batch Setup); Performing Batch Setup Using A Usb Flash Drive - Epson EB-1985WU User Manual

Copy Menu Settings to Another Projector (Batch Setup)

After selecting the projector's menu settings for one projector, you can save
the settings to a USB flash drive or a computer connected with a USB cable
to copy settings to another projector, as long as they are the same model.
Menu settings such as the following are not copied to the other projector.
• Network menu settings (except for the Mail menu and the Others
menu)
• Lamp Hours and Status from the Info menu
a
Perform batch setup before adjusting the image settings such as
Keystone. Image adjustment values are also applied to another
projector and the adjustment you made before performing the batch
setup function is overwritten.
When copying the menu settings from one projector to another, user's
logo is also copied. Do not register the information that you do not
want to share between multiple projector as a user's logo.
Caution
Epson takes no responsibility for batch setup failures and associated repair costs
due to power outages, communication errors, or other problems that may cause
such failures.
Related Links
• "Adjusting the Menu Settings"
• "Performing Batch Setup Using a USB Flash Drive"
• "Performing Batch Setup Using a USB Cable"

Performing Batch Setup Using a USB Flash Drive

You can copy menu settings from one projector to another of the same
model using a USB flash drive.
p.131
p.154
p.155
a
The USB flash drive must use a FAT format and not incorporate any
security function. Delete any files on the drive before using it for batch
setup or the settings may not be saved correctly.
a
Disconnect the power cord from the projector, and check that all
of the projector's lights have turned off.
b
Connect an empty USB flash drive directly to the projector's USB-A
port.
c
Hold down the [Esc] button on the remote control or the control
panel and connect the power cord to the projector.
d
When all of the projector's lights turn on, release the [Esc] button.
The lights start flashing and the batch setup file is written to the
USB flash drive. When writing is finished, the projector turns off.
Caution
Do not disconnect the power cord or the USB flash drive from the
projector while the file is being written. If the power cord or drive is
disconnected, the projector may not start correctly.
e
Remove the USB flash drive.
a
The file name for the batch setup file is PJCONFDATA.bin. If
you need to change the file name, add text after PJCONFDATA
using only alphanumeric characters. If you change the
PJCONFDATA section of the file name, the projector may not
be able to recognize the file correctly.
154