Epson EB-1985WU User Manual page 136

Input Signal Settings - Signal Menu
Setting Options
Input Signal Auto
RGB
Component
Video Signal Auto
NTSC
NTSC4.43
PAL
M-PAL
N-PAL
PAL60
SECAM
Aspect See the list of
available aspect ra‐
tios
Overscan Auto
(For component Off
video and RGB
4%
video signal input)
8%
Image Processing Fine
Fast
Reset —
Description
Specifies the signal type from input
sources connected to computer ports.
Auto: detects signals automatically.
RGB: corrects color for computer/RGB
video inputs.
Component: corrects color for compo‐
nent video inputs.
Specifies the signal type from the input
sources connected to the video ports.
Auto: detects signals automatically.
If interference appears or no image
appears when set to Auto, select the
appropriate signal according to the
connected equipment.
Sets the aspect ratio (width-to-height
ratio) for the selected input source.
Changes the projected image ratio to
make the edges visible by a selectable
percentage or automatically.
Adjusts image processing speed/quality.
Fast: increases image processing speed.
Fine: increases image quality.
Resets all adjustment values on the
Signal menu to their default settings,
except for Input Signal and Image
Processing.
a
You cannot select the Noise Reduction setting when the following are
being input.
• The Image Processing setting is set to Fast.
• The Progressive setting is set to Off.
• A digital RGB signal is being input.
• An interlaced signal (480i/576i/1080i) is being input.
Related Links
• "Adjusting the Menu Settings"
• "Available Image Aspect Ratios"
p.131
p.59
136