Copy Menu Settings To Another Projector (Batch Setup); Performing Batch Setup Using A Usb Flash Drive - Epson EB-U32 User Manual

Copy Menu Settings to Another Projector (Batch Setup)

After selecting the projector's menu settings for one projector, you can save
the settings to a USB flash drive or a computer connected with a USB cable to
copy settings to another projector, as long as they are the same model.
Menu settings such as the following are not copied to the other projector.
• Network menu settings (except for the Mail menu and the Others menu)
• Lamp Hours and Status from the Info menu
Perform batch setup before adjusting the image settings such as
a
Keystone. Since image adjustment values are also copied to another
projector, the adjustments you made before performing the batch setup
are overwritten and the projected screen you adjusted may change.
When copying the menu settings from one projector to another, user's
logo is also copied. Do not register the information that you do not
want to share between multiple projector as a user's logo.
Caution
Epson takes no responsibility for batch setup failures and associated repair costs
due to power outages, communication errors, or other problems that may cause
such failures.
g g Related Links
• "Performing Batch Setup Using a USB Flash Drive"
• "Performing Batch Setup Using a USB Cable"

Performing Batch Setup Using a USB Flash Drive

You can copy menu settings from one projector to another of the same model
using a USB flash drive.
The USB flash drive must use a FAT format and not incorporate any
a
security function. Delete any files on the drive before using it for batch
setup or the settings may not be saved correctly.
a
Disconnect the power cord from the projector, and check that all of the
projector's indicators have turned off.
p.119
p.120
b
Connect an empty USB flash drive directly to the projector's USB-A
port.
c
Hold down the [Esc] button on the remote control or the control panel
and connect the power cord to the projector.
d
When all of the projector's indicators turn on, release the [Esc] button.
The indicators start flashing and the batch setup file is written to the
USB flash drive. When writing is finished, the projector turns off.
Caution
Do not disconnect the power cord or the USB flash drive from the projector
while the file is being written. If the power cord or USB flash drive is
disconnected, the projector may not start correctly.
e
Remove the USB flash drive.
The file name for the batch setup file is PJCONFDATA.bin. If
a
you need to change the file name, add text after PJCONFDATA
using only alphanumeric characters. If you change the
PJCONFDATA section of the file name, the projector may not be
able to recognize the file correctly.
f
Disconnect the power cord from the projector to which you want to
copy settings, and check that all of the projector's indicators have
turned off.
g
Connect the USB flash drive containing the saved batch setup file to the
projector's USB-A port.
h
Hold down the [Menu] button on the remote control or the control
panel and connect the power cord to the projector.
i
When all of the projector's indicators turn on, release the [Menu]
button. (The indicators remain on for approximately 75 seconds.)
119