Brother DCP-7055 Service Manual page 337

APPENDIX 4 HOW TO MAKE PROTECTIVE MATERIAL OF DRUM UNIT
Protective material
Make the protective material of drum unit by the following procedures, and use it at the time of packing.
<Procedure>
(1) Pass the Paper strip through the hole of Protective material. (The white surface of Paper
strip is the upper side.)
(2) Pass the end of Paper strip through the hole of Paper strip, and then pull the end of
Paper strip to the direction of the arrow.
Protective
material
Paper strip
Protective
material
Fig. APP. 4-1
App. 4-1
Protective
material
Paper strip
Confidential