Advertisement
Erasing Messages
You can either erase individual messages (see "To erase an individual
message:" below) or all of the read, unprotected messages on your pager
at once (see "To erase all messages:" on page 29).
To erase an individual message:
E
Press and release ] until the
message you want to erase is displayed.
10:05a
7-16
Standby screen
E
Press and release \ until
I
displayed.
555-1234
First screen of message
to be erased
To erase all messages:
Note: This procedure will only erase previously read and unprotected
messages. (No unread or protected messages will be erased.)
E
Press and release \ until
all ?
10:15a
7-16
Standby screen
E
Press and release ]. All previously
read and unprotected messages are
erase all ?
erased from memory.
Erase all prompt
E
10:20a
7-16
Standby screen
is
erase ?
27
erase
is displayed.
29
E
Press and release ] to erase this
I
message. All remaining messages are
erase
?
moved to the next available message
slot.
Erase prompt
E
10:10a
7-16
Standby screen
28
Setting Automatic On/Off
You can set your pager to turn on and off at a selected time of day. You must
enable this feature (using the
pager auto ?
establish the timeframe for it (using the
Note: This feature will activate daily until it is disabled.
To enable the automatic on/off feature:
E
Press and release \ until
auto ?
10:35a
7-16
Standby screen
E
Press and release ]. The automatic
on/off feature is now enabled. The
pager auto
?
Standby screen is displayed with the
automatic feature indicator (
Pager auto prompt
pager is in audible mode or
vibrate mode).
30
function) before you can
function).
set auto ?
pager
is displayed.
C
if the
B
if in
Advertisement
