Advertisement
E
Press and release \ to adjust the
hour. (In this example, the hour is
0:00a
changed to 3.)
Hour value flashing
E
Press and release ] to accept the
new hour setting. The first minute value
3:00a
is now flashing.
Hour value has been set
E
Press and release \ to adjust the first
minute value and ] to accept it. (In
3:00a
this example, the first minute is changed
to 4.) The second minute value is now
First minute value flashing
flashing.
E
Press and release \ to select either
the 12- or 24-hour method of time
12 hours
measurement. (In this example, the
measurement method is 12 hours.)
Method of measurement
(hour value) flashing
E
Allow the pager to return to the Standby
screen or press and release [ twice
3:46p
rapidly to quickly return to the Standby
screen. You have finished with the time
New time setting
setting.
Note: If you had selected the 24-hour
method of measurement, the time would
now reflect this (for example, 3:46 PM is
displayed as 15:46).
E
3:40a
Second minute value flashing
E
3:46a
AM/PM indicator flashing
7
8
Setting the Date
Note: This section begins with the default date setting.
E
0:00a
Standby screen
E
set date ?
Set Date prompt
E
1-01
Month value flashing
9
10
Press and release \ to adjust the
second minute value and ] to accept
it. (In this example, the second minute is
changed to 6.) The AM/PM indicator is
now flashing.
Note: If your pager is using the 24-hour
method of measurement, skip to Step 8.
Press and release \ to adjust the AM/
PM indicator to either
a
(PM) and ] to accept it. (In this
example, the indicator is changed to P.)
The method of time measurement is
flashing.
Press and release \ until
is displayed.
date ?
1-01
Press ]. The month value begins to
flash.
Press and release \ to adjust the
month. (In this example, the month is
changed to 7.)
(for AM) or
for
p
set
Advertisement
