Advertisement
E
If there are no further message screens
02
for this message (that is, there is no I
9:25a
displayed), the message ends with the
time this message was received (9:25A
Last message screen for this
in this example). In this example,
message—ending with the time
because there were two unread
the message was received
messages, the next unread message
is displayed (indicated by the
message indicator).
E
Repeat Steps 3 and 4 to read the next
01
message. When all messages have
555-5678
been read, either allow the pager to
automatically return to the Standby
First screen of next
screen or press and release [ twice
unread message
rapidly to return to the Standby screen.
Note: When all messages have been
read, the message indicator is not
displayed.
E
Press and release ] to protect this
I
message. The protected message
protect
?
indicator (F) is now displayed whenever
this message is displayed.
Protect prompt
E
F
Note: F is only displayed when this
I
protected message is displayed. It is not
555-1234
displayed on the Standby screen.
Protected message
To unprotect a message:
E
Press and release ] until the
message you want to unprotect is
9:55a
7-16
displayed.
Standby screen
Protecting and Unprotecting Your Messages
You can protect up to ten messages so they are not erased or replaced by
newly received messages.
To protect a message:
01
555-1234
First screen of message
23
24
555-1234
First screen of message
555-1234
25
26
E
Press and release ] until the
message you want to protect is
9:25a
7-16
displayed.
Standby screen
E
Press and release \until
I
is displayed.
to be protected
E
F
Press and release \until
I
unprotect ?
to be unprotected
E
F
Press and release ] to unprotect this
I
message. The protected message
unprotect
?
indicator (F) is removed from this
message.
Protect prompt
E
I
Unprotected message
protect ?
is displayed.
Advertisement
