Advertisement
E
Press and release ] to accept the
new hour setting. The date value begins
7-01
to flash.
Month value has been set
E
Press and release \ to adjust the date
value. (In this example, the date is
7-01
changed to 15.)
Date value flashing
E
Press and release ] to accept the
new date setting. The month value is
7-15
now flashing again.
Date value flashing
Press ]. The first alert mode option
E
(
vibrate ?
set alert ?
Set Alert prompt
E
Press and release \ to scroll through
all of the alert modes (
vibrate
?
audio ?
alert ?
Vibrate mode prompt
11
) is displayed.
,
vibrate ?
,
, and
chirp ?
no
).
13
E
Allow the pager to return to the Standby
screen or press and release [ twice
7-15
rapidly to quickly return to the Standby
screen. The new date is displayed.
Date value has been set
Setting the Incoming Message Alert Mode
Note: You can choose from four different message alert modes: vibrating
alert (vibration with no audible alert), an audio alert (audible, pleasing
alert), a chirp alert (short beep alert), or no alert (completely silent).
E
Press and release \ until
alert ?
3:51p
7-15
Standby screen
12
E
When you have decided which mode to
select, press and release ] while the
audio
?
mode is displayed. The pager will emit
the selected alert mode (if any choice
Audio mode prompt
other than the
For this example,
Note: If the audio mode is selected, your
pager automatically displays the existing
pleasing alert. Continue to the next
section ("Setting the Pager Alert
Pattern").
Setting the Pager Alert Pattern
Besides the chirp, vibrate, and no alert modes, there are seven different
alert pattern options from which you can select. These patterns are only
available if you have selected the audio alert mode.
Note: If you have just selected the alert mode, skip to Step 3. Otherwise,
go to Step 1.
14
set
is displayed.
mode).
no alert ?
is selected.
audio ?
Advertisement
