Furuno DSC-60 Installation Manual page 25

3.2.2 For other transceiver connection
When connecting to the transceiver which cannot be controlled by IEC-61162 format, select OFF
at RT PORT on the setup menu.
When connecting to other maker's transceiver which is controlled by IEC-61162 format, set the
DIP switches in the main unit.
For SSB radiotelephone (RT), TX data
#1
OFF
For SSB radiotelephone (RT), RX data
#2 is ON
#2 is OFF
3.2.3 For navigator connection
Set the output data format from the navigator to IEC: RS-422 or Current Loop, and set S5 DIP
switch in the main unit as below.
For IEC: RS-422
DIP switch S5
#4
For Current Loop
DIP switch S5
#4
DIP switch S4
#2
OFF
DIP switch S5
Setting for RS-422
Setting for Current Loop
[IEC]
DSC-60
(GLL,RMC,RMA,GGA,ZDA)
Navigator connection
ON
OFF
#3 #4
ON ON
(Setting for RS-422)
NAV DATA
19
Navigator